Yes, if you can reach them safely. Plenty of people with panels on a bungalow, garage or ground mount clean them themselves. The key rule is simple: stay on the ground.
Don’t go on the roof
Falls from height are among the most common causes of serious injury at work, and a wet roof is slippery. Panels themselves aren’t made to be walked on. Trina Solar’s user manual says plainly not to stand on the modules for cleaning work, and the Energy Saving Trust warns that panels can crack or break under a person’s weight.
If you can’t reach the panels from the ground without straining, leave it to someone with the right kit.
Before you start
- Turn the system off. The Energy Saving Trust advises switching your system off before cleaning; your manual will say how. Panels produce electricity whenever there’s daylight, and water makes any fault more dangerous.
- Look for damage. Never clean a panel with cracked glass or exposed wiring. Call your installer instead.
- Pick a cool time. Early morning, evening or an overcast day.
What to use
- A soft brush, sponge or cloth on a long pole. Nothing abrasive: makers’ manuals rule that out.
- Plain water. A hose on a gentle setting is fine for rinsing.
- Purified water, if you can get it. JinkoSolar’s manual says water with a high mineral content “may leave deposits on the glass surface and is not recommended”. Kent’s tap water is hard, so it tends to dry in white spots. Professionals use filtered, mineral-free water for that reason.
What to avoid
- Pressure washers. The Energy Saving Trust says to avoid high-pressure power washers, because they can interfere with the seals and wiring and let water in.
- Detergents and household cleaners. Water alone is the safe default. Washing-up liquid can leave a residue. Makers differ on anything stronger: JinkoSolar says never to use chemicals, as it may affect the warranty and the output, while Trina Solar allows ordinary glass cleaner for greasy marks. Check the manual for your own panels first.
- Cold water on hot glass. JinkoSolar warns that cleaning a hot panel with cool water can break the glass. Trina Solar says not to clean during the hottest part of the day.
- Scraping or hard brushes. For stuck-on droppings, soak them and wait instead of scrubbing.
Step by step
- Pick a cool, dry, still day, early or late.
- Turn the system off.
- Rinse the panels to soften the dirt.
- Brush gently from top to bottom, working across the array.
- Pay attention to the bottom edge of each panel, where dirt collects.
- Rinse again, ideally with purified water to avoid spots.
- Turn the system back on.
When to call someone in
- Panels you can’t reach from the ground
- Heavy bird mess, moss or lichen
- Pigeons nesting underneath, which needs clearing and bird proofing
- Commercial or farm roofs, especially fragile barn roofs
If you’re in Kent, you can book a clean online at a fixed price, or send us a photo first. If yours are easy to reach and only a little dusty, we’ll tell you it’s a DIY job.