The right person to clean your solar panels is whoever uses soft brushes and low-mineral water, stays off the roof, is insured for this specific job and gives you a fixed price. That can be a specialist or a good window cleaner. These seven questions will tell you which you’re talking to.
1. What do you clean the panels with?
Good answer: a soft brush on a water-fed pole, and water. Nothing else.
Panel makers are consistent on this. Trina Solar’s manual asks for a soft cloth, sponge or soft-bristled brush. JinkoSolar’s says never to use chemicals or abrasive material. The Energy Saving Trust says to avoid high-pressure power washers.
Be wary of: pressure washers, detergents, scourers, or “whatever we use on the conservatory”.
2. What water do you use?
Good answer: purified water, sometimes called pure, deionised or reverse osmosis water.
Tap water in hard water areas dries to white mineral spots. Canadian Solar’s installation manual recommends “cleaning water with low mineral content and a pH value close to neutral”. JinkoSolar’s says water with a high mineral content “may leave deposits on the glass surface and is not recommended”. Most of Kent has hard water, so this matters here.
3. Will anyone go on my roof or stand on the panels?
Good answer: no. We work from the ground.
Trina Solar’s manual says not to stand on the modules, and the Energy Saving Trust warns that panels can crack under a person’s weight. A water-fed pole reaches bungalows and most two storey homes from the garden or the drive. If a roof can’t be reached that way, the honest answer is that it needs a platform or a different plan, not a walk across the tiles.
4. Does your insurance name solar panel cleaning?
Good answer: yes, and here is the certificate.
Don’t assume it does. One specialist insurer, Gleaming Insurance, says: “Most general liability policies exclude cover for specialist tasks like solar panel cleaning.” The cover to look for includes damage to the thing being cleaned. Insurers call it “damage to property worked on” or “damage to property being cleaned”.
Ask us this too, before we start any work.
5. When will you clean them?
Good answer: early, late, or on a cool or overcast day.
Canadian Solar’s manual says to wash panels “during the cool part of the day”. JinkoSolar warns that cool water on a hot panel can break the glass. Someone who turns up at noon in a July heatwave hasn’t read the manuals.
6. What happens if you spot a problem?
Good answer: we tell you, with photos, and we don’t touch the electrics.
A cleaner sees your array closer than anyone else does. Cracked glass, loose fixings, damaged cables and birds nesting underneath are all worth knowing about. Electrical faults are a job for an MCS-certified installer, and a good cleaner will say so.
7. Is the price fixed, and what does it include?
Good answer: a fixed price before the visit, with photos afterwards.
For a sense of the going rate, Bark’s 2026 figures put the average clean at £145 a visit, from about £70 for a small system. Our cost guide has the detail.
Window cleaner or specialist?
Either can do it well. Many window cleaners already own a water-fed pole and a purified water system, which is the right kit. What you are checking is whether they treat a solar array as different from a window: a softer brush, no detergent, a cool time of day, the system switched off if the maker asks for it, and insurance that names the job.
A specialist should be able to answer all seven questions without hesitating. So should a good window cleaner. If the answers are vague, keep looking.
How we answer
We are Bright Panel, a solar panel cleaning business based in Canterbury. Purified water, soft brushes, from the ground, fixed prices published online, and before and after photos. Hold us to the same seven questions.